This is very simple routine which will allow you to sketch outlines or footprint of the building
using standard AutoCAd procedure COMMAND LINE @ 10<90 in addition to it UCS icon
will be placed at the end of the line with Y direction same as direction of the line.
So you do not have to recalculate angles for the direction of your line - in other words
UCS Origin at the endpoint is temporary set to 0,0,0. Press enter when done.
If UCS pops not at the end of the line - use DINAMIC ZOOM to zoom out and UCS icon will jump
to the end of the line. Program is tested and works in R14 and R2000
To download pick here AQD.EXE (self extracting Zip file)
BACK